路缘石模具特点是带圆弧，带缺口，带双线条，关于路缘石模具来说是尺度较大的了，从图片上来看质量是肯定过关的，当然实际产品咱们都是通过检测合格以后才出厂的，都是选用上等的聚丙烯pp原料制造，避免氧化，避免破损，避免变形，进步运用率。路边石模具随着我国高等级公路的飞速发展，全面推行机械化施工，是大势所趋，这关于进步施工质量，加速施工进度有着重要作用。
The kerb mould features arc, notch and double lines. The scale of the kerb mould is large. From the picture, the quality is sure to pass the customs. Of course, the actual products are delivered only after passing the inspection. They are all made of high-quality polypropylene raw materials to avoid oxidation, damage, deformation and utilization rate. With the rapid development of high-grade highway in China, it is the general trend to carry out mechanized construction in an all-round way, which plays an important role in improving construction quality and accelerating construction progress.
预制路边石施工首要是把预制好的路边石砌在路肩预挖的沟槽中。施工进度慢、工序多、占用场所大，路边石的全体强度差、线条不顺畅。滑模施工法是采用路边石滑模机在施工现场将新拌路边石资料接连现浇．并密实成型．每天可铺筑1500m左右。滑模法铺筑路边石速度快、所需人工少、不需求预制场所，铺筑的路边石全体结构强度高、线型顺畅美观，倍受施工单位和业主的青睐。
The construction of prefabricated curbstone is mainly to lay the prefabricated curbstone in the pre excavated trench of the shoulder. The construction progress is slow, there are many working procedures, the occupied area is large, the overall strength of the curbstone is poor, and the lines are not smooth. The slip form construction method is to use the slip form machine of curbstone to continuously cast in situ the newly mixed curbstone data on the construction site, and to compact and form it. It can be paved about 1500m every day. The slip form method has the advantages of high speed, less manpower and no prefabrication place. The whole structure of the paving curbstone is of high strength, smooth and beautiful line, which is favored by the construction unit and the owner.