不要忽略路沿石设备自身运转期间的各项消耗费用的高低。因水泥制品没有科技含量,考查路沿石设备时.竞争性强,故基础建设、设备投资不易过大,否则会有风险性、投资之前主要考虑资金、场地、市场及设备后期使用费用的高低。选择产量太高的设备,如市场不够好,资金、场地不充足的话很容易造成停产、工人放假。中小型设备照样能够生产出非常好的制品,投资小,见效快,一台不够用,就进两台、三台,也可以生产不同的产品,不至于停产放假。其实能够留住熟练工人也是很关键的问题。制作工艺要求,路沿石设备是砖机的核心易耗品.精确耐用,不变形不磨损,厂采用特有的模具生产技术。根据客户提供的砖样样品或者是图纸,工程师根据图纸设计模具。下料车间根据工程师图纸进行合理下料。线切车间根据模具图纸,将其用线切割把尺寸切割进去。热处置车间把模具进行热处理。喷漆车间把模具进行抛光,使模具外表粗糙度降低,以获得光亮、平整外表的加工方法,最后是涂油或者喷漆。

Don't neglect the cost of roadside stone equipment during its operation. Because cement products have no scientific and technological content, when inspecting the stone equipment along the road, the competitiveness is strong, so the investment in infrastructure and equipment is not easy to be too large, otherwise there will be risk, before investment, the main consideration is the level of capital, site, market and later use cost of equipment. Choosing equipment with too high output, such as inadequate market, inadequate capital and space, can easily lead to shutdown and workers'holidays. Small and medium-sized equipment can still produce very good products, small investment, quick results, one is musiban.89ix.comshilongw.89ix.comfangpaow.89ix.comgangbanw.89ix.comsangna.89ix.comwen

quan.89ix.comnot enough, into two, three, can also produce different products, not to stop production holidays. In fact, the ability to retain skilled workers is also a key issue. The equipment along the road is the core consumable of the brick machine. It is precise and durable without deformation and wear. The factory adopts the unique die production technology. According to the brick samples or drawings provided by customers, engineers design the mould according to the drawings. The blanking workshop shall make reasonable blanking according to the engineer's drawings. According to the die drawings, the wire cutting workshop cuts the dimension in by wire cutting. The die is heat treated in the heat treatment workshop. The spray painting workshop polishes the die to reduce the surface roughness of the die, so as to obtain a bright, flat surface processing method, and finally paint or spray paint.