1、长时间使用路沿石模具后必须磨刃口,研磨后刃口面必须进行退磁,不能带有磁性,否则易发生堵料。
1. The edge must be sharpened after long-term use of the stone mold along the road, and the edge must be demagnetized after grinding. It can not be magnetic, otherwise it is easy to occur plugging.
2、路沿石模具在使用过程中冲头易出现折断、弯曲和啃坏的现象,冲套一般都是啃坏的。冲头和冲套的损坏一般都用相同规格的零件进行更换。
2. The punch is easy to break, bend and gnaw in the process of using the stone mold along the road. The punch sleeve is generally gnawed. The damage of punch and punching sleeve is usually replaced by parts of the same specification.
3、路沿石模具保养时检查各部位的配件关系及有无损坏,对损坏的部分进行修复,气动顶料检查有无漏气现象,并对具体的情况采取措施。
3. Check the relationship between the parts and the damaged parts, repair the damaged parts, check the leakage of the pneumatic ejecting material, and take measures to the specific situation.
4、路沿石模具弹簧等弹性零件在使用过程中弹簧最易损坏,通常出现断裂和变形现象。采取的办法就是更换,在更换过程中一定要注意弹簧的规格和型号,弹簧的规格和型号通过颜色、外径和长度三项来确认,只有在三项都相同的情况下才可以更换。
4. The elastic parts such as stone mold spring along the road are most easily damaged in the course of using, and the spring is usually broken and deformed. The method is to replace, in the replacement process must pay attention to the specifications and models of the spring, spring specifications and models through the color, diameter and length of three to confirm, only in the case of three are the same can be replaced.